Feet and strap positions do not always match perfectly from left to right. A setting card preserves the comfortable position of each sandal instead of forcing both sides to look identical.
Adjust in the order you wear them
With the usual bare foot or sock choice, set the strap nearer the toes first, then the strap nearer the ankle. Walk on a suitable level surface and sit once. Make small changes only after the foot has settled.
Record the left and right sandals separately. Depending on the closure, note the hole number, visible mark, buckle position or another repeatable reference. Photograph each side from above.
Example card
Left: front strap position 3; rear position 4.
Right: front position 3; rear position 3.
Checked during a ten-minute indoor trial.
Recheck comfort, not symmetry
Restore the recorded settings after cleaning or storage, then walk briefly. If one foot feels different, inspect for a twisted strap, debris or an incorrect position before changing both sandals. A visually symmetrical setup is not automatically the correct one.
When to discard the old card
Make a new record if the strap material, closure condition, foot comfort or intended activity changes. Do not keep tightening to compensate for a damaged component; inspect the sandal and follow the product guidance.
Take the reference photos while standing naturally, not while lifting a foot toward the camera. Weight-bearing can change how straps sit. A helper or a mirror lets the setting card reflect the position that matters during normal wear.
The Waterproof EVA Sandals listing is the relevant internal reference. Confirm the actual adjustment system shown on the current page.